The on switch is on the right hand side on the base as you look at it.
- Make sure the water holder at the back is full
- Turn on the machine. The lights on either side at the top will flash green. Once it has warmed up, they will stay on.
- Lift the silver handle on the top and place the pod inside. Close the handle fully.
- Place a cup /mug under the nozzle. You can fold down the tray for smaller cups
- Press the button on either side of the machine, depending on whether you want an espresso (left hand side) or longer (right hand side).
- If the lights on the side are flashing alternately, it is in standbys mode. Press either button and wait for the lights to stay on.
To empty the pod holder, slide out the container at the front of the machine.
For Cappuccino or Latte Milk.
- Fill the milk container to the required level. The lower max level is max fill cappuccino and the upper max line is the max fill for latte.
- Ensure the magnetic frother is fitted in the base of the machine. For cappuccino ensure the wire surround is on the frother, remove this for latte.
- For hot milk, press the button at the base briefly and the button will light red and complete the cycle in around 60 seconds
- For cold milk, press the button for longer and the it will light blue but still froth
- To reset the cycle, lift the container from the base.